FAQ

Frequently Asked Questions

Yes, lever handles are available as well as 1/4 turn ceramic discs. Customers should be aware that lever handle taps come at an additional cost of $70 per set.

Yes, 3/4 turn ceramic discs are available on cross handle tapware that is not exposed. Please add $70 per tap set to the cost of your purchase.

Yes, a range of accessories are available to complete the offering.

With proper care and regular cleaning the electroplated finish used on our tapware and accessory range will provide many years of service without tarnishing. Chrome plating is extremely durable and very hard wearing.

WELS stands for ‘Water Efficiency Labelling and Standards’. It is an Australian government initiative which enforces mandatory labelling of all tapware and shower products sold in Australia, to indicate their water efficiency. The higher the WELS star rating on a product, the more water efficient the product is. Please refer to www.waterrating.gov.au for more information.

Yes, all of our tapware and shower products meet stringent Australian Standards and comply with the Australian Governments mandatory WELS testing.

Mixer taps have become much more popular in recent years both due to design and function. Mixer taps use a ceramic disc cartridge technology to mix and control the flow of water, as opposed to conventional tapware which uses a jumper valve system. Mixers have a modern ‘one spout-one handle’ look, while 3-piece sets offer a more traditional aesthetic.

Yes, it is recommended that you have a licenced Plumber install your tapware otherwise it may void your warranty.

Yes, it can be used with both low and high if the pressure in no less than 150 kpa and no higher the 500 kpa. Should the pressure exceed 500 kpa our products can still be used providing an approved pressure limiting device is applied.

Call a licenced Plumber, there are a number of options for you to correct the unequal pressure, like a pressure compensating valve.

There are many reasons why your tap might be leaking. We recommend that you have your washers and seals replaced every 12 months. These can be purchased from your local plumbing supply store. If you have no plumbing experience, please seek help from a professional plumber.

Please review our Warranty page for more details.

Get in touch with us

We are glad that you preferred to contact us. Please fill our short form and one of our friendly team members will contact you back.

    X